Charger¶
Repo: CARSSCenter/OpenNerve-Charger
Not approved for human use
Nothing described on this page has regulatory clearance for human use. See Regulatory status and disclaimers.
CAD model of charger, showing inductive charging coil and PCBA.
About¶
A wireless charger that inductively charges the OpenNerve IPG.
Firmware runs a state machine (INITIALIZATION → WAIT → SCAN →
SLOW_CHARGE_AND_SCAN/CHARGE) with front-panel buttons for scan, MCU reset,
and DFU (USB-C firmware update) mode, and LED indicators for charge state.
Charging includes thermal protection: it stops automatically if the IPG
reports a temperature at or above 41 °C.
(source)
Firmware details and documentation¶
Maturity¶
Evidence E1 Bench tested
Manufacturing readiness M2 Manufacturable using PCBA suppliers and 3D printing